Panasonic Service Modes

Panasonic Service Modes

PD60U / PX6U / PX60U / PX600U 
PD50U / PX50U / PX500U

Hold down the {VOL -} button ON THE PLASMA TV. 
Press the {} RECALL button three times on the remote. 
The Service Menu will be display. 
Use {1} {2} one remote to navigate main menu items. 
Use {3} {4} on remote sub-menu items to navigate. 
Use {VOL VOL +} {-} for remote item of value to change. 
Write down all values before changing 
Once the value is changed, THE CHANGE IS MADE. 
Power off to exit service mode and save.

---

PA25UP / PD25UP / PX25UP:

Using the remote control: 
Press the {} MENU button. 
Set "Antenna" to "Cable". 
Select "Timer" menu and set the sleep timer to 30 min. 
Press {S} Twice to exit menus. 
Tune to channel 124. 
Press and hold {VOL -} button ON THE PLASMA TV.

"CHK" at Appears in top-left corner Followed by five letter / numbers 
(Which Are the cumulative hours in hex numbers)

* While the "CHK" is display, press the {OK} and {VOL +} buttons 
ON THE TV simultaneously to toggle Between Modes:

Red "CHK" for servicemen, Yellow "CHK" for Aging

Press the {POWER} button on the remote to select one of the six 
servicemen Adjustments Modes.

A MTS ADJUSTMENT 
B CLOCK ADJUSTMENT 
C. VIDEO ADJUSTMENT 
D. HDEF ADJUSTMENT 
E. VDEF ADJUSTMENT 
F. DAF ADJUSTMENT 
G. OTHER ADJUSTMENT

Press * {+} CH {CH -} on the remote to select the settings 
for each of Service Adjustment Modes.

Write down the original values before modifying anything. 
It's easy to adjust the wrong item erroneously.

Press * {VOL VOL +} {-} on the remote to change values. 
* Press the {POWER} button on the TV to exit the service menu.

---

PA20UP / PX20UP:

Using the remote control: 
Press the {} MENU button. 
Press the "Setup" menu. 
On "Mode" menu, select "Cable" 
Select "Timer" menu and set the sleep timer to 30 min. 
Press {ACTION} Twice to exit menus. 
Tune to channel 124. 
Press and hold {VOL -} button ON THE PLASMA TV.

"CHK" at Appears in top-left corner Followed by five letter / numbers 
(Which Are the cumulative hours in hex numbers)

While the "CHK" is display, press the {ACTION}and {VOL +} buttons 
ON THE TV simultaneously to toggle Between Modes:

Red "CHK" for servicemen Yellow "CHK" for Aging

Press the {POWER} button on the remote to select one of the six 
servicemen Adjustments Modes.

A MTS ADJUSTMENT 
B CLOCK ADJUSTMENT 
C. VIDEO ADJUSTMENT 
D. HDEF ADJUSTMENT 
E. VDEF ADJUSTMENT 
F. DAF ADJUSTMENT 
G. OTHER ADJUSTMENT

Press {+} CH {CH -} on the remote to select the settings 
for each of Service Adjustment Modes.

Write down the original values before modifying anything. 
It's easy to adjust the wrong item erroneously.

Press {VOL VOL +} {-} on the remote to change values. 
Press the {POWER} button on the TV to exit the service menu.

---

LCDs / CRTS / RPTVs:

Hold down the {VOL -} button ON THE TV. 
Press the {} RECALL button three times on the remote. 
The Service Menu will be display. 
Use {1} {2} one remote to navigate main menu items. 
Use {3} {4} on remote sub-menu items to navigate. 
Use {VOL VOL +} {-} for remote item of value to change. 
Write down all values before changing 
Once the value is changed, THE CHANGE IS MADE. 
Power off to exit service mode and save.

---

Projectors:

Press the {} MENU button. 
Go to the "Options" menu. 
Highlight "OSD". 
Then press and hold the {ENTER} button, 
until the Service Menu can display. 
Press the {} MENU button to exit.

---

Projectors:

Turn on the Projector. 
Press the {POWER} button. 
The "Power Off" confirmation will come up on screen. 
Then press {} {LEFT DOWN UP} {} {} {UP DOWN}& {} ENTER buttons.

The Service Menu will be display. 
To exit, turn the Projector Off.

---

PLASMAS 8UK / 9UK:

Hold down the {VOL -} button ON THE PLASMA DISPLAY. 
Press the {} STATUS button three times on the remote. 
(Status button is the one above the Setup button) 
The Menu Service (CAT) will be display. 
(CAT = Computer Aided Test Menu) 
Use the cursors keys on the remote to select the mode. 
And press the Action key {} to access the menu. 
To exit each mode, press the {R} button. 
To exit the CAT menu, press the {STATUS}button. 
Press {} POWER button on the Plasma to exit the service mode.

---

PLASMAS 3UY / 4UY / 5UY / 6UY / 7UY:

Hold down the {VOL -} button ON THE PLASMA DISPLAY. 
Press the {} STATUS button three times on the remote. 
(Including the one below Status button Power button) 
The Menu Service (CAT) will be display. 
(CAT = Computer Aided Test Menu) 
Use the cursors keys on the remote to select the mode. 
And press the Action key {} to access the menu. 
To exit each mode, press the {R} button. 
To exit the CAT menu, press the {STATUS}button. 
Press {} POWER button on the Plasma to exit the service mode.