SHARP Service Modes

Sharp Aquos LC-80LE632U Service Menu Instructions

1. Turn the LCD on and then unplug the power cable.


2. While pressing and holding the {INPUT} & {VOL -} buttons on the remote, plug the power cable back into the outlet.


3. When it powers up you will see a little "k" appear in brackets.Then on the TV, press the {VOL -} & {CH -} buttons at the same time.


4. The Service Menu will be displayed.
   
   
   • {CH +} & {CH -} buttons navigate through options.
   
   
   • {VOL+} & {VOL-} buttons change values.
   
   
   
   


5. To exit, turn the power off.

Unplug the TV 

Press and hold the {VOL -} & {CH} + buttons. 

While holding the buttons above, plug in the TV. 

The TV will turn on with the Service Menu Display.

There are five category menus: 

Deflection - Signal - Feature - Fixed Value - EEPROM 

Use {CH} + {CH -} buttons to select the category. 

Note: Not all models will have five categories. 

Some will jump to 'Signal' category.

Use {} VOL + to enter the category. 

Use {CH} + {CH -} buttons to select the item to be adjusted. 

Use {VOL VOL +} {-} buttons to adjust the value. 

Turn the set off to exit the Service Menu.

---

LCD TVs:

While the LCD is on, unplug the power cable. 

Then while Pressing the {} & INPUT {VOL -}buttons on the remote, the power cable plug back into the outlet. 

When it powers up you will see a little "s" Appear in brackets. 

Then on the TV, press and hold {VOL - CH} & {-}down and release. 

The Service Menu will be display. 

Use {CH} + {CH -} buttons to navigate 

Use {VOL VOL +} {-} buttons to adjust the value. 

Turn the set off to exit the Service Menu.

---

Projectors:

Press {INPUT UP} {} {} {DOWN ENTER} {} {MENU} ENTER

buttons on the back of the Projector. 

Now use the remote control to navigate through menus. 

To exit the Service Menu: 

Press {INPUT} {UP} {DOWN} {ENTER} {ENTER} {} MENU

buttons again on the back of the Projector.

---

PROJECTOR:

Press {UP} {UP} {DOWN} {} {DOWN LEFT RIGHT} {} {} ENTER

buttons on the Projector (or remote?). 

The Service Menu will be display. 

To exit, turn the Projector Off.

HITACHI Service Mode

RPTVs:

F59 SERIES

Press and hold the {} MENU button on the TV. 
Then press the {MENU 8} {} {} SELECT buttons on the remote. 
To exit, press the {} MENU button on the TV or 
the {} EXIT button on the remote control.

DCAM Mode:

Using the remote control: 
Hold down the {TV} button. 
Press the {} MENU button. 
Press the {INFO} button. 
Release the {TV} button. 
Remote Control Key Functions When In DCAM Mode:

INPUT {} ............. Blue (13x9 adjust) 
{} ............ ASPECT ROM Write 
{DAY / NIGHT} ....... ROM Read .. 
{MENU} .............. Remove Color 
{EXIT} .............. Cross Hatch / Video Mode 
{INFO} .. ............ Green 
{GUIDE Calculation .............} 
{2} ................. Cursor Up 
{5} ................. Cursor Down 
{6} ................. RIGHT cursor 
{4}. ................ CURSOR LEFT 
{0} ................. RED (Adjust 7x5) 
{} .... STOP .......... Initialize 
{PLAY .............. Raster Position} 
{} FAST FORWARD ...... Phase

The DCAM to Exit Mode:

Press and hold the {TV} button. 
Press the {0} button. 
Press the {1} button. 
Release the {TV} button.

---

Projectors:

Press the {MENU} & {} RESET buttons And Then press the {} reset button again and hold it for at Least 5 seconds. 
The Service Menu will be display. 
To exit, turn the Projector Off.

---

MISC:

1. 
Turn on the TV. 
Press the {MENU MENU} {} {} {8} SELECTbuttons on the remote. 
The Service Menu will be display. 
Use the {UP} {} DOWN buttons to select items. 
Use the {{LEFT RIGHT}} to change the data. 
Press the {} EXIT button to exit the Service Menu.

2. 
Turn the TV off. 
Press and hold the {} INPUT button on the TV Then press {POWER} . 
Hold Both buttons until the TV powers on 
with the Service Menu Display. 
Use the {UP} {} DOWN buttons to select items. 
Use the {{LEFT RIGHT}} to change the data. 
Press the {} EXIT button to exit the Service Menu.

Third

Turn the TV off. 
Press {POWER} & {INPUT} buttons on the TV for more than 3 sec. 
The Service Menu will be display. 
The letter "P" indicates picture and "A" indicates audio. 
Use the {UP} {} DOWN buttons to select items. 
Use the {{LEFT RIGHT}} to change the data. 
Press the {} EXIT key to exit the Service Menu.

Panasonic Service Modes

Panasonic Service Modes

PD60U / PX6U / PX60U / PX600U 
PD50U / PX50U / PX500U

Hold down the {VOL -} button ON THE PLASMA TV. 
Press the {} RECALL button three times on the remote. 
The Service Menu will be display. 
Use {1} {2} one remote to navigate main menu items. 
Use {3} {4} on remote sub-menu items to navigate. 
Use {VOL VOL +} {-} for remote item of value to change. 
Write down all values before changing 
Once the value is changed, THE CHANGE IS MADE. 
Power off to exit service mode and save.

---

PA25UP / PD25UP / PX25UP:

Using the remote control: 
Press the {} MENU button. 
Set "Antenna" to "Cable". 
Select "Timer" menu and set the sleep timer to 30 min. 
Press {S} Twice to exit menus. 
Tune to channel 124. 
Press and hold {VOL -} button ON THE PLASMA TV.

"CHK" at Appears in top-left corner Followed by five letter / numbers 
(Which Are the cumulative hours in hex numbers)

* While the "CHK" is display, press the {OK} and {VOL +} buttons 
ON THE TV simultaneously to toggle Between Modes:

Red "CHK" for servicemen, Yellow "CHK" for Aging

Press the {POWER} button on the remote to select one of the six 
servicemen Adjustments Modes.

A MTS ADJUSTMENT 
B CLOCK ADJUSTMENT 
C. VIDEO ADJUSTMENT 
D. HDEF ADJUSTMENT 
E. VDEF ADJUSTMENT 
F. DAF ADJUSTMENT 
G. OTHER ADJUSTMENT

Press * {+} CH {CH -} on the remote to select the settings 
for each of Service Adjustment Modes.

Write down the original values before modifying anything. 
It's easy to adjust the wrong item erroneously.

Press * {VOL VOL +} {-} on the remote to change values. 
* Press the {POWER} button on the TV to exit the service menu.

---

PA20UP / PX20UP:

Using the remote control: 
Press the {} MENU button. 
Press the "Setup" menu. 
On "Mode" menu, select "Cable" 
Select "Timer" menu and set the sleep timer to 30 min. 
Press {ACTION} Twice to exit menus. 
Tune to channel 124. 
Press and hold {VOL -} button ON THE PLASMA TV.

"CHK" at Appears in top-left corner Followed by five letter / numbers 
(Which Are the cumulative hours in hex numbers)

While the "CHK" is display, press the {ACTION}and {VOL +} buttons 
ON THE TV simultaneously to toggle Between Modes:

Red "CHK" for servicemen Yellow "CHK" for Aging

Press the {POWER} button on the remote to select one of the six 
servicemen Adjustments Modes.

A MTS ADJUSTMENT 
B CLOCK ADJUSTMENT 
C. VIDEO ADJUSTMENT 
D. HDEF ADJUSTMENT 
E. VDEF ADJUSTMENT 
F. DAF ADJUSTMENT 
G. OTHER ADJUSTMENT

Press {+} CH {CH -} on the remote to select the settings 
for each of Service Adjustment Modes.

Write down the original values before modifying anything. 
It's easy to adjust the wrong item erroneously.

Press {VOL VOL +} {-} on the remote to change values. 
Press the {POWER} button on the TV to exit the service menu.

---

LCDs / CRTS / RPTVs:

Hold down the {VOL -} button ON THE TV. 
Press the {} RECALL button three times on the remote. 
The Service Menu will be display. 
Use {1} {2} one remote to navigate main menu items. 
Use {3} {4} on remote sub-menu items to navigate. 
Use {VOL VOL +} {-} for remote item of value to change. 
Write down all values before changing 
Once the value is changed, THE CHANGE IS MADE. 
Power off to exit service mode and save.

---

Projectors:

Press the {} MENU button. 
Go to the "Options" menu. 
Highlight "OSD". 
Then press and hold the {ENTER} button, 
until the Service Menu can display. 
Press the {} MENU button to exit.

---

Projectors:

Turn on the Projector. 
Press the {POWER} button. 
The "Power Off" confirmation will come up on screen. 
Then press {} {LEFT DOWN UP} {} {} {UP DOWN}& {} ENTER buttons.

The Service Menu will be display. 
To exit, turn the Projector Off.

---

PLASMAS 8UK / 9UK:

Hold down the {VOL -} button ON THE PLASMA DISPLAY. 
Press the {} STATUS button three times on the remote. 
(Status button is the one above the Setup button) 
The Menu Service (CAT) will be display. 
(CAT = Computer Aided Test Menu) 
Use the cursors keys on the remote to select the mode. 
And press the Action key {} to access the menu. 
To exit each mode, press the {R} button. 
To exit the CAT menu, press the {STATUS}button. 
Press {} POWER button on the Plasma to exit the service mode.

---

PLASMAS 3UY / 4UY / 5UY / 6UY / 7UY:

Hold down the {VOL -} button ON THE PLASMA DISPLAY. 
Press the {} STATUS button three times on the remote. 
(Including the one below Status button Power button) 
The Menu Service (CAT) will be display. 
(CAT = Computer Aided Test Menu) 
Use the cursors keys on the remote to select the mode. 
And press the Action key {} to access the menu. 
To exit each mode, press the {R} button. 
To exit the CAT menu, press the {STATUS}button. 
Press {} POWER button on the Plasma to exit the service mode.